HSA2030
Spectrum analysis from 9 kHz to 3.2 GHz
A spectrum analyzer with a 9 kHz–3.2 GHz frequency range, a displayed average noise level of -161 dBm, and RBW settings from 10 Hz to 1 MHz.
Price on request
2 modelsChoose model
DC Power Supply
Image source: Hantek product catalogue
Image source: Hantek product catalogueDC Power Supply
HDP4000Three- and four-channel programmable DC power
High performance four-channel programmable linear DC regulated power supply; 4.3-inch color display, real-time display voltage/current/power value and waveform, which makes the output status and trend clear at a glance; 1mV/1mA high resolution, < 350 μVrms / 2 mVpp low ripple noise, 245W high output power, ≤50μs fast transient response; Four channels are electrically isolated and each channel is continuously adjustable; Over voltage, over current, over temperature, short circuit protection functions; Timing and delay output, constant voltage, constant current function; Four working modes: independent, series, parallel, tracking; Digital keyboard input and storage, keyboard lock function; Rich interface configurations: USB HOST, USB DEVICE, digital I/O interface, LAN, RS232/485, GPIB.
3 channels · 245 W · USB/LAN
Price on requestPrice is set for each model in the store admin.
Selected model and price are saved with your cart and order.
- Four-channel programmable linear DC regulated power supply, 245W output power, electrical isolation between channels, four channels continuously adjustable.
- The HDP4000S series supports rear output, making it easy to test system wiring, with a 2-wire/4-wire display mode.
- 4.3-inch color display, real-time display voltage/current/power values and waveform, which makes the output status and trend clear at a glance.
- High resolution: 1 mV, 1 mA; HDP4000S series resolution: 0.1 mV, 1UA.
- Low ripple noise: < 350 μVrms / 2 mVpp.
- Transient response time: ≤50μs.
- Over voltage/over current/over temperature/short circuit protection functions. The over voltage and over current parameters can be flexibly set to achieve effective load protection.
- Intelligent temperature control fan automatically adjusts the speed, effectively reducing fan noise.
- The use of color and numeric identifiers makes it easy for users to identify information relevant to the output of a particular channel.
- Provide 10 groups of storage for sequence/delay/record/panel condition settings.
- List function. By editing the single-step voltage, current, time, list function can generate a variety of complex sequences to meet the complicated test requirements.
- Recorder function. The recorder can record the output voltage, current and power, and display them by graph.
- Keyboard lock function to prevent misoperation.
- Support SCPI remote command control.
- Support U disk (FAT32 format, Flash) storage, one-click screenshot and data recording function.
- Standard configuration ports: USB HOST, USB DEVICE, LAN, digital I/O interface, RS232/RS485 (HDP4324B/HDP4424B), GPIB (HDP4324H/HDP4424H).
Excellent industrial design
A perfect combination of art and technology. Not only beautiful and fashionable, but also durable, accurate and stable.
4.3-inch color display
The set values and actual output values of the four channels are displayed on the same screen which makes users clear at a glance. Built-in V\A\W value and waveform display make the change trend all in control.
List and data recording functions
The list and data recording functions generate a variety of complex sequences by editing the single-step voltage, current and time to meet the complex test requirements, and record the actual voltage, current and power data of each step through the data recording function, and also generate waveform diagrams.
Low ripple noise, low load regulation rate, fast transient response
Low ripple noise: < 350 μVrms / 2 mVpp, meets the demand of high purity power supply. Low load regulation rate: Voltage: ≤0.01% + 2mV, current: ≤0.01% + 250μA, calmly copes with the change of load. Fast transient response time: ≤50μs, meets the needs of rapid voltage change.
Over voltage, over current, over temperature protection functions
Provides the overvoltage and overcurrent protection functions. You can flexibly set the overvoltage and overcurrent parameters to effectively protect loads.
Four modes: independent, series, parallel, tracking
The series and parallel functions can combine two power supplies into one power supply to obtain double voltage or current, expanding the applicable range and flexibility of the power supply.
Rich interface configurations
USB HOST, USB DEVICE, LAN, 4-line digital I/O interface; RS232/RS485 (HDP4324B/HDP4424B); GPIB (HDP4324H/HDP4424H); Support U disk (FAT32 format, Flash) storage; Support SCPI remote command control; Supports post output function, 2-wire/4-wire mode display.
Convenient computer connection
Plug and play, safe and stable, provide free secondary development instructions, making it easy to form an automatic test system.
| Model | Channel | Total power | Output | Resolution | Noise | Load regulation rate | Power regulation rate | Screen | Standard interface |
| HDP4324 | 3CH | 245W | 32V/ 3.2A, 32V/3.2A, 8V/5A | 1 mV, 1 mA | <350μVrms / 2mVpp |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
4.3 inch TFT | USB HOST, USB DEVICE, Digital I/O, LAN |
| HDP4324B | 3CH | 245W | 32V/ 3.2A, 32V/3.2A, 8V/5A | 1 mV, 1 mA | <350μVrms / 2mVpp |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
4.3 inch TFT | USB HOST, USB DEVICE, Digital I/O, LAN, RS232, RS485 |
| HDP4424 | 4CH | 245W | 32V/3.2A, 32V/3.2A, 8V/2A, 16V/1.5A | 1 mV, 1 mA | <350μVrms / 2mVpp |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
4.3 inch TFT | USB HOST, USB DEVICE, Digital I/O, LAN |
| HDP4424B | 4CH | 245W | 32V/3.2A, 32V/3.2A, 8V/2A, 16V/1.5A | 1 mV, 1 mA | <350μVrms / 2mVpp |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
4.3 inch TFT | USB HOST, USB DEVICE, Digital I/O, LAN, RS232, RS485 |
| Model | Channel | Total power | Output | Resolution | Noise | Load regulation rate | Power regulation rate | Screen | Standard interface |
| HDP4324S | 3CH | 245W | 32V/ 3.2A, 32V/3.2A, 8V/5A | 0.1 mV, 1 μA | <350μVrms / 2mVpp |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
4.3 inch TFT | USB HOST, USB DEVICE, Digital I/O, LAN, RS232, RS485 |
| HDP4324SH | 3CH | 245W | 32V/ 3.2A, 32V/3.2A, 8V/5A | 0.1 mV, 1 μA | <350μVrms / 2mVpp |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
4.3 inch TFT | USB HOST, USB DEVICE, Digital I/O, LAN, RS232, RS485, GPIB |
| HDP4424S | 4CH | 245W | 32V/3.2A, 32V/3.2A, 8V/2A, 16V/1.5A | 0.1 mV, 1 μA | <350μVrms / 2mVpp |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
4.3 inch TFT | USB HOST, USB DEVICE, Digital I/O, LAN, RS232, RS485 |
| HDP4424SH | 4CH | 245W | 32V/3.2A, 32V/3.2A, 8V/2A, 16V/1.5A | 0.1 mV, 1 μA | <350μVrms / 2mVpp |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
Voltage:≤0.01% + 2mV; Current:≤0.01% + 250μA; |
4.3 inch TFT | USB HOST, USB DEVICE, Digital I/O, LAN, RS232, RS485, GPIB |
| Dc output (0℃ ~ 40℃) | |||||
| Channel | voltage | current | |||
| HDP43XX | CH1 | 32V | 3.2 A | ||
| CH2 | 32V | 3.2 A | |||
| CH3 | 8V | 5A | |||
| HDP44XX | CH1 | 32V | 3.2 A | ||
| CH2 | 32V | 3.2 A | |||
| CH3 | 8V | 2A | |||
| CH4 | 16V | 1.5 A | |||
| Series-parallel output | |||||
| Channel | Series | parallel | |||
| HDP43XX | CH1 | 64 v, 3.2 A | 32 v, 6.4 A | ||
| CH2 | |||||
| CH3 | - | - | |||
| HDP44XX | CH1 | 64 v, 3.2 A | 32 v, 6.4 A | ||
| CH2 | |||||
| CH3 | - | - | |||
| CH4 | - | - | |||
| Load regulation rate ± (output percentage + bias) | |||||
| Voltage | < 0.01% + 2 mV | ||||
| Current | < 0.01% + 250 μA | ||||
| Linear regulation rate ± (output percentage + bias) | |||||
| Voltage | < 0.01% + 2 mV | ||||
| Current | < 0.01% + 250 μA | ||||
| Ripple and noise (20Hz ~ 20MHz) | |||||
| Norm voltage | < 350 μVrms/ 2 mVpp | ||||
| Accuracy (25℃±5℃) ± (output percentage + bias) | |||||
| Channel | programming | read-back | |||
| voltage | current | voltage | current | ||
| HDP43XX | CH1 | 0.05% + 10 mV | 0.2% + 5 mA | 0.05% + 10 mV | 0.2% + 5 mA |
| CH2 | |||||
| CH3 | 0.1% + 5 mV | 0.1% + 10 mA | 0.1% + 5 mV | 0.1% + 10 mA | |
| HDP44XX | CH1 | 0.05% + 10 mV | 0.2% + 5 mA | 0.05% + 10 mV | 0.2% + 5 mA |
| CH2 | |||||
| CH3 | 0.1% + 5 mV | 0.1% + 10 mA | 0.1% + 5 mV | 0.1% + 10 mA | |
| CH4 | |||||
| Transient response time | |||||
| The time for the output current changing from full load to half load, or from half load to full load, and the output voltage returning to 15mV is less than 50μs. | |||||
| Machinery | |||||
| Size | 232*153*392 mm | ||||
| Weight | HDP43XX | 9.15 Kg | |||
| HDP44XX | 9.45 Kg | ||||
| Power supply | |||||
| Ac input (50Hz to 60Hz) | 100Vac±10%, 115Vac±10%, 230Vac±10% (Max. 250Vac) | ||||
| Maximum input power | 600VA | ||||
| Environment | |||||
| Cooling method | Air cooling | ||||
| Working temperature | 0 ℃ to 50 ℃ | ||||
| Storage temperature | - 40 ℃ ~ 70 ℃ | ||||
| Humidity | 0℃ to 30℃ : ≤95% relative humidity | ||||
| 30℃ to 40℃ : ≤75% relative humidity | |||||
| 40 ° C to 50 ° C: ≤45% relative humidity | |||||
| Altitude | Below 3000 metres | ||||
| Dc output (0℃ ~ 40℃) | |||||
| Channel | voltage | current | |||
| HDP43XX | CH1 | 32V | 3.2 A | ||
| CH2 | 32V | 3.2 A | |||
| CH3 | 8V | 5A | |||
| HDP44XX | CH1 | 32V | 3.2 A | ||
| CH2 | 32V | 3.2 A | |||
| CH3 | 8V | 2A | |||
| CH4 | 16V | 1.5 A | |||
| Series-parallel output | |||||
| Channel | Series | parallel | |||
| HDP43XX | CH1 | 64 v, 3.2 A | 32 v, 6.4 A | ||
| CH2 | |||||
| CH3 | - | - | |||
| HDP44XX | CH1 | 64 v, 3.2 A | 32 v, 6.4 A | ||
| CH2 | |||||
| CH3 | - | - | |||
| CH4 | - | - | |||
| Load regulation rate ± (output percentage + bias) | |||||
| Voltage | < 0.01% + 2 mV | ||||
| Current | < 0.01% + 250 μA | ||||
| Linear regulation rate ± (output percentage + bias) | |||||
| Voltage | < 0.01% + 2 mV | ||||
| Current | < 0.01% + 250 μA | ||||
| Ripple and noise (20Hz ~ 20MHz) | |||||
| Norm voltage | < 350 μVrms/ 2 mVpp | ||||
| Accuracy (25℃±5℃) ± (output percentage + bias) | |||||
| Channel | programming | read-back | |||
| voltage | current | voltage | current | ||
| HDP43XX | CH1 | 0.05% + 10 mV | 0.2% + 5 mA | 0.05% + 10 mV | 0.2% + 5 mA |
| CH2 | |||||
| CH3 | 0.1% + 5 mV | 0.1% + 10 mA | 0.1% + 5 mV | 0.1% + 10 mA | |
| HDP44XX | CH1 | 0.05% + 10 mV | 0.2% + 5 mA | 0.05% + 10 mV | 0.2% + 5 mA |
| CH2 | |||||
| CH3 | 0.1% + 5 mV | 0.1% + 10 mA | 0.1% + 5 mV | 0.1% + 10 mA | |
| CH4 | |||||
| Transient response time | |||||
| The time for the output current changing from full load to half load, or from half load to full load, and the output voltage returning to 15mV is less than 50μs. | |||||
| Machinery | |||||
| Size | 232*153*392 mm | ||||
| Weight | HDP43XX | 9.15 Kg | |||
| HDP44XX | 9.45 Kg | ||||
| Power supply | |||||
| Ac input (50Hz to 60Hz) | 100Vac±10%, 115Vac±10%, 230Vac±10% (Max. 250Vac) | ||||
| Maximum input power | 600VA | ||||
| Environment | |||||
| Cooling method | Air cooling | ||||
| Working temperature | 0 ℃ to 50 ℃ | ||||
| Storage temperature | - 40 ℃ ~ 70 ℃ | ||||
| Humidity | 0℃ to 30℃ : ≤95% relative humidity | ||||
| 30℃ to 40℃ : ≤75% relative humidity | |||||
| 40 ° C to 50 ° C: ≤45% relative humidity | |||||
| Altitude | Below 3000 metres | ||||
Download
Manuals and product files
Continue exploring
More from the catalogue.
DPO7000
500 MHz oscilloscope with 2 GSa/s sampling
A 500 MHz oscilloscope with 2 GSa/s sampling, a 25 MHz waveform generator, and a 10.1-inch multi-touch display.
Price on request
4 modelsChoose model
HDG3000B
Dual-channel waveform generation up to 100 MHz
A dual-channel waveform generator with variant-dependent frequency coverage from 1 μHz to 100 MHz, 250 MSa/s sampling, 16-bit resolution, and a 4.3-inch display.
Price on request
6 modelsChoose model